M9430A

Description: Keysight M9430A, 2 half-duplex and 2 full-duplex ports, PXI Wireless Test Module

Manufacturer Keysight Technologies
Series PXI
Part Number M9430A

Need to purchase this item?

tektronix



Agilent M9430A PXI Wireless Test Module

The M9430A is a 6 GHz PXI Wireless Test Module manufactured by Agilent with a 1 GS/s DAC on the VSG side and 400MS/s ADC on the VSA side, giving 160 MHz of investigation data transfer capacity. The M9430A module has two half-duplex and two full-duplex ports. There are two unique interfaces for test applications which keep running on the EXM. The interfaces are propelled independently, utilizing either the LaunchXSA or LaunchXSA MultiTouch symbols on the desktop. Many EXM setup methods are performed in an unexpected way, contingent upon which of the two interfaces is running. The M9430A is used in a test set, which comprises of instruments stacked in a PXI rack, taken cover behind a front board. There is a controller (situated on the extreme left), and one to four TRX (transmit/get) sub-instruments, every one of which incorporates a RF flag generator and a RF flag analyzer. A frequency reference instrument, shared by all the TRX sub-instruments, is put in the inside. The Agilent M9430A can be inserted into the E6640A EXM Wireless Test Set.

Arrangements are inward alignment modifications which the M9430A module must make to guarantee that inside flag levels are maintained. To maintain a strategic distance from intrusions, the arrangements are not run consequently. The user run them expressly. The External Gain is subtracted from the adequacy readout (or the loss is added to the readout). Thus, the flag level communicates with the flag level at the yield of the gadget under-test, which can be the contribution of an outside gadget that gives gain or misfortune.

ModelM9430A
ManufacturerHP/Agilent/Keysight
TypePXI Wireless Test Module
Ports2 half-duplex and 2 full-duplex ports
Compatible Models:E6640A Test Set
Resolution1 Hz
StatusObsolete
M9430A ManualUser Manual and Maintenance Manual Available for Download
ApplicationIndustrial

Agilent M9430A Frequently Asked Questions

 

Question: How many modules can be used with the M9430A in the E6640A Wireless Test Set?

 

Answer: A maximum of four M943xA modules can be inserted into the E6640A Wireless Test Set at a time.

 

Question: Which firmware application runs the Agilent M9430A?

 

Answer: The Agilent M9430A runs by the XSA firmware application.

 

Question: Which measurements on the E6640A are not supported by the M9430A?

 

Answer: The measurements on the E6640A that are not supported by the M9430A include 802.11af, ah, and ax. These measurements may result in an invalid outcome.