E4448A

Description: E4448A PSA Series Spectrum Analyzer: 10 MHz analysis bandwidth

Manufacturer Keysight Technologies
Series PSA Spectrum Analyzers
Part Number E4448A
tektronix



Agilent PSA E4448A

 

The E4448A model is a Spectrum Analyzer part of the PSA Series, which were created in the year 2000 to offer high-performance solutions to R&D and manufacturing engineers in areas such as: defense, aerospace, and communications. The E4448A has a frequency range between 3 Hz to 50 GHz and a frequency span of 0 Hz, 10 Hz and 50 GHz.

The PSA Series address application-specific requirements with capabilities including one-button measurement simplicity and 16 measurement personalities such as W-CDMA, HSDPA/HSUPA, GSM with EDGE, cdma2000, 1xEV-DV, 1xEV-DO, cdmaOne, NADC, TD-SCDMA Modulation Analysis, and PDC .

One of the most important features of this model is the Option 117; this option allows you to use the security mode the next time the analyzer's power is cycled. If you ordered this option, it means that the secure memory’s erase option is loaded into the memory of your instrument and licensed at the factory but not enabled. You should not enable this option until you finish the configuration of your instrument. This process will require you to set the system, config I/O settings as needed, and configure the power-up state you desire. When you are satisfied with the new configuration, you can enable the Secure Memory Erase option by pressing System, Security and Enabled. Once Option 117 is present, the number of personalities that can be loaded into the memory is limited to 3 or 4.

The E4448A and the previous models have similar power requirements: 100 to 120 Vrms, 50/60/400 Hz

ModelE4448A Agilent PSA
ManufacturerKeysight
SeriesPSA Agilent
TypeSpectrum Analyzer
VNA Frequency3 Hz to 50 GHz
Bandwidth10 MHz analysis bandwidth
Temperature RangeOperating Temperature: 0 degrees C to 55 degrees C
StatusOne Year
E4448A ManualUser Manual and Maintenance Manual Available for Download
ApplicationIndustrial

E4448A FAQ- Agilent PSA

Frequently Asked Questions

Question:

Does the PSA Series support GPRS measurements?

Answer:

Yes. Options 202 and Option B7 are required for this function.

 

Question:

Why do I need to update firmware on the PSA for the GSM/EDGE option?

Answer:

Once you update firmware, you can get the updated test limits to comply the lastest 3GPP standards and flexible test limits in most measurements.

 

Question:

How do I use the PSA Series Spectrum Analyzer to make Phase Noise Measurements?

Answer:

Personality Option 226 is used for Phase Noise Measurements.

 

Question:

How do I upgrade the PSA Series Firmware and Measurement Personalities?

Answer:

Both the PSA Series firmware and measurement personalities can be upgraded by using the LAN or crossover cable.