E3620A

Keysight E3620A DC Power Supply

The Keysight E3620A DC Power Supply incorporates output ratings (with a maximum current derated 3.3% per °C from 40°C to 55°C), where Output 1 has a voltage between 0 to 25 V and a current between 0 to 1 A, and Output 2 has the same values. The maximum power of this model is 50W, the Ripple and Noise is from 20 Hz to 20 MHz, the normal mode voltage rms is 350 µV, the Peak-to-Peak is 1.5 mV, the load and line regulation is 0.01% + 2mV, and the Meter Resolution has a voltage of 10 mV (0-20 V), 100 V (>20 V) and a current of 1 mA.

The E3620A Dual Output Power Supply is a compact, constant voltage/current restricting supply that conveys two isolated 0 to 25 v outputs rated toward 1 A. This model is a perfect power supply for design and broadband work where single or double voltages are needed. Each output voltage may be ceaselessly variable for its range and separate current limit circuits secure each output against over-load or short circuit damage.

Associations to the outputs are created to binding post type terminals on the front board. The outputs can be used separately or in combination to fulfill whatever number of output requests the user requires. The positive or negative terminal for each output could be grounded or each output can be left floating. A chassis ground terminal is located on the front board of the supply.