6269B

HP Agilent 6269B DC Power Supply

The HP Agilent 6269B is a programmable DC power supply. It is designed to suit specifically bench or relay rack operation. This model offers outstanding performance characteristics to meet user demands. It has a built-in series regulator, which enables the user to achieve exemplary regulation and a high level of efficiency. The instrument has low ripple and noise at the output. The user has the option of navigating from zero to the maximum rated value. The front panel has integrated indicators and control parameters, which makes it simpler to control the output voltage and current.

The 6269B has great protection mechanisms. This model also has a built-in crowbar circuit, which rapidly reacts against overvoltage. It helps to avoid any catastrophic impact on the instrument. The crowbar circuit shorts the output terminals of the supply. It does so automatically to avoid permanent damage to the supply and load. The front panel also offers control to adjust the tripping voltage of the crowbar. The model can be adjusted from 10 % to 110 % of the maximum rated voltage of the supply. The 6269B has a forced air cool mechanism, which prevents the power supply from overheating. The power supply’s rear panel accommodates different terminals to offer various capabilities. For example, the AC input connections are made through terminals on the back panel. Other dc outputs and remote sensing connections are made at rear panel terminals.

The 6269B also offers the capability to ground one of the terminals of supply. The user can ground positive or negative terminals of the supply. The rear panel terminals allow access to control points. These are the regulated circuits. The 6269B power supply has an output voltage rating of 0 to 40 volts. The current for the power supply has the range of 0 to 50 amperes.