83711B

Agilent 83711B Signal Generator

The Agilent 83711B blended CW Signal Generator sets another standard for execution at a value that is shockingly reasonable. Never again will you need to surrender recurrence scope, balance, or unwavering quality to meet your financial plan. This signal generator will perform past your desires at a cost inside your budget. Basic oscillators and exchanged low-pass channels convey <-55 dBc sounds, dispose of subharmonics and stifle spurious to <-60 dBc. This model gives a lot of output control (commonly >+14 dBm), while spectral purity is kept up even at high power levels (typical output control at frequencies beneath 1 GHz is +20 dBm).

The 83711B is designed to give helpful information in assessing instrument ability in your application by depicting typical, however not justified, execution. This model 10 MHz input accepts a 10 MHz ±100 Hz, 0 to 10 dBm, outside reference motion for operation from an outer high steadiness time base. Ostensible information impedance is 50ω.

This instrument works with the Standard Commands for Programmable Instruments (SCPI). SCPI conforms to IEEE 488.2-1987. Likewise, this instrument will copy most pertinent Agilent 8673 charges, furnishing general similarity with ATE frameworks which incorporate 8673 arrangement signal generators. This model acknowledges input motion for outside pulse adjustment. Likewise acknowledges outer trigger pulse contribution for inside pulse regulation. TTL-level, ostensible impedance is 50 ohms.

83711B outputs a signal that takes after the RF output in all pulse modes. This model also outputs a synchronizing beat, ostensibly 50 ns width, amid inward and activated pulse adjustment.