83711B

Description: Synthesized CW Generator Agilent / Keysight / HP

Manufacturer Keysight Technologies
Series 837xx Signal Generators
Part Number 83711B
tektronix



Agilent 83711B Signal Generator

The Agilent 83711B blended CW Signal Generator sets another standard for execution at a value that is shockingly reasonable. Never again will you need to surrender recurrence scope, balance, or unwavering quality to meet your financial plan. This signal generator will perform past your desires at a cost inside your budget. Basic oscillators and exchanged low-pass channels convey <-55 dBc sounds, dispose of subharmonics and stifle spurious to <-60 dBc. This model gives a lot of output control (commonly >+14 dBm), while spectral purity is kept up even at high power levels (typical output control at frequencies beneath 1 GHz is +20 dBm).

The 83711B is designed to give helpful information in assessing instrument ability in your application by depicting typical, however not justified, execution. This model 10 MHz input accepts a 10 MHz ±100 Hz, 0 to 10 dBm, outside reference motion for operation from an outer high steadiness time base. Ostensible information impedance is 50ω.

This instrument works with the Standard Commands for Programmable Instruments (SCPI). SCPI conforms to IEEE 488.2-1987. Likewise, this instrument will copy most pertinent Agilent 8673 charges, furnishing general similarity with ATE frameworks which incorporate 8673 arrangement signal generators. This model acknowledges input motion for outside pulse adjustment. Likewise acknowledges outer trigger pulse contribution for inside pulse regulation. TTL-level, ostensible impedance is 50 ohms.

83711B outputs a signal that takes after the RF output in all pulse modes. This model also outputs a synchronizing beat, ostensibly 50 ns width, amid inward and activated pulse adjustment.

Model83711B
ManufacturerKeysight
SeriesAgilent
TypeSignal Generator
VNA Frequency1 to 20 GHz
Frequency switching time<50 ms to within 1 kHz
Output Power0.01 1 GHz
StatusOne Year
83711B ManualUser Manual and Maintenance Manual Available for Download
ApplicationIndustrial

83711B FAQ- Agilent Signal Generator

Frequently Asked Questions

Question:

What is the output range for the Agilent 83711B?

Answer:

The output range is -4dBm- +10 dBm.

Question:

What is the operating temperature range for the Agilent 83711B Signal Generator?

Answer:

The operating temperature range is 0 to 55 degrees C.

Question:

Is Option 800 (Phase Modulation) available for the 83711B?

Answer:

No, it is only available for the 83731B and the 83732B.