6050A

Agilent 6050A Electronic Load

The 6050A Electronic Load centralized computer acknowledges client installable load modules for simple framework arrangement and future reconfiguration. The 60504B holds up three load modules, permitting up to 1800 watts of aggregate greatest power. Just a single GPIB address is all you requirement for finish control and readback of all load modules inside a solitary centralized server.

The Agilent 60504B is perfect for the test and assessment of dc control sources and power segments and can be utilized as a part of numerous ranges identified with creation and approaching examination. A standout amongst the most prominent attributes of this instrument is the simple voltage control in consistent current mode.

Model 60504B has GPIB control and readback of current, voltage and resistance. This model additionally incorporates electronic alignment, a trigger for outside synchronization and an inherent heartbeat waveform era with programmable adequacy, recurrence, duty cycle and slew rate. The 60504B has a full insurance from over-present, over-voltage, over-control, over-temperature and reverse polarity.

Agilent electronic loads meet all specifications when worked over 3.0 V; in any case, the dc working attributes likewise reach out beneath this base info voltage for static tests. On account of the FET technology utilized as a part of the power input circuits, these electronic loads have a low least info resistance enabling them to sink high streams even at low voltages. The low-voltage operation, down to zero volts, is conceivable at correspondingly-lessened current levels, contingent upon the base resistance of the heap. These electronic burdens, in this manner, can be utilized as a part of numerous applications that beforehand required zero-volt loads.
 

The 6050A 1,800-W electronic load centralized servers acknowledge the client installable load modules for simple framework setup and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, permitting up to 1,800 W of maximum power.

The dc electronic load family is likewise totally compatible with the 59510A hand-off frill. The 59510A gives physical sisolation of the dc electronic load from the gadget under test or whatever other test instrument by exchanging force and sense leads. Fit for changing up to 60 A and 200 Vdc, the 59510A can be controlled by raise board motions on the electronic load.

The 6050A Option J10 is adjusted for battery testing. This item gives tri-level pulse loading, to recreate precise conditions on batteries. It additionally highlights a programmable least battery voltage limit (measured at the load terminal). In case that the voltage of the battery under test falls underneath this limit, the load will naturally turn itself off.

The 6050A has a net weight of 0.5 Kg (21 lb), a ship weight of 13.6 Kg (30 lb) and a size of 425.5 mm W x 177 mm H x 624.7 mm D (16.75 in x 7 in x 24.6 in).

This model incorporates the famous Option 910; this is an additional manual set, including one each of the working manual, programming instructional pamphlet and administration manual. The programming manual is accessible with the centralized computer, and consequently not with singular modules.