6631B

Keysight 6631B DC Power Supply

The Keysight 6631B high execution DC Power Supply offers velocity and exactness for test optimization. The single output, 80-100 W, GPIB 6631B provides acceptable fast, low-noise outputs, programmable active down-programmer sinks the full rated current; dual-range, and precision low current estimation. In addition, this model has an optional isolation and polarity reversal relays. This model is a versatile medium-power solution for automated applications that lessens the development time with a mix of benchtop and framework features designed for demanding design and test necessities.

Usually, in this instrument, the test procedures require the utilization of a variable load capable of dissipating the required force. When a variable resistor is used, switches should be used to either connect, disconnect, or short the load resistor. For many tests, an electronic load can be utilized. The electronic load may be simpler to utilize over load resistors, but it might not work quickly enough to test transient recovery time and might be excessively loud for the noise (PARD) tests.

This model has an output voltage between 0 to 8 V, output current between 0 to 10 A, voltage of 5 mV, + Current of 0.05% + 4 mA, voltage normal mode rms of 0.3 mV, voltage normal mode peak-to-peak of 3 mV, fast mode rms/peak-to-peak of 1 mV/10 mV, and current rms of 3 mA.

If you are interested in this model and you want to know more about its options, features and specifications, you can check its manual, which is available on the