6033A

Keysight 6033A DC Power Supply

The Keysight 6033A 200-watt dc Power Supply takes the place for numerous power supplies in the user’s test framework by the maximum power at a variety of operating points. Business standard SCPI commands and VXI plug & play drivers make system integration simple. Utilizing the serial link, a maximum of 16 power supplies can be associated through one GPIB address. This power supply has fantastic electrical efficiency, settling on it a great decision to expansive frameworks.

In this model, up to two similar units might be associated in series or auto-parallel, to give expanded output capabilities. Blending supplies with different output competencies is not recommended under certain conditions; the lower output supply may be stressed beyond its maximum voltage. The user should confirm that there are no broken knobs or connectors, that the cabinet and board surfaces are free of dents and scratches, and that the meter face and rear-panel plastic covers are not scratched or cracked.

This model has a voltage between 0 to 20 Vdc, current between 0 to 30 A, Ripple & noise (voltage/rms peak-peak/current rms) of 3 mV/30 mV, voltage accuracy of 0.07% +6 mV, load regulation of 2 mV and 9 mA, a GPIB interface, weighs 21 lbs., and has dimensions of 177 mm (6.97 in) H x 212 mm (8.36 in) W x 444 mm (17.9 in) D.

The 6033A Power Supply is a Safety Class 1 instrument (provided with a protective earth terminal). The instrument and its manual should be reviewed to safety markings and guidelines before operation. Its manual can be found on the